EPS Automatic Block Molding Machine Is Widely Used In Block Making Industry

For F.R. block, the steam plates are coated with special Teflon to ensure the material not easy to be stick with the plates.

For F.R. block, the raw material silo has the mixing function, this can ensure the uniformity of the filling. This is very important for F.R. EPS material.

In the chamber there is a separation plate to separate one big block into two blocks. And the two blocks are weighting separately and be recorded separately. It saved cutting step when block out of the chamber.

The outfeed racks are equipped with automatic transferring line to drying room as an option. It means that there is no need of manual operation from block shaping to block drying. This saves much labor cost.

Q: What is the capacity of the Block machine?

A: 1pcs 6m Length plate in 3-8 minutes(according to customer’s request and material)

Q: How is it easy to assemble the Block machine on the site?

A: It is very easy to assemble, the main parts are Chamber, vacuum system, Feeding silo, Outfeeding racks.

Q: How can you control the gravity of the blocks?

A: The machine has the automatic weighting system, every block is weighted when out. The gravity data is input in the PLC, if the gravity is out of tolerance, there will be an alarm.

Q: How much the tolerance for the overall dimension of the finished block?

A: +/-2mm in three directions ( Length, Width, Height).